Beeldscherm Telefoon Maken

Beeldscherm Telefoon Maken

How to Make a Phone Screen

How to Make a Phone Screen

Creating a phone screen from scratch requires a certain level of technical knowledge and expertise. However, in this article, we will provide you with a step-by-step guide on how to construct a phone screen for your device.

Gather the Necessary Materials

Before getting started, make sure you have the following materials at hand:

  • Phone screen glass
  • Touch digitizer
  • Adhesive tape
  • Microfiber cloth
  • Tools (screwdriver, heat gun, cutter)

Disassemble the Phone

To begin, you need to disassemble your phone carefully. Use a screwdriver to open the back cover and remove the battery, SIM card, and any other components that might interfere with the screen replacement process. Make sure you keep the screws in a safe place to prevent losing them.

Remove the Old Screen

Use the heat gun to warm up the edges of the phone screen. This will soften the adhesive and make it easier to remove the old screen. Next, slowly and gently lift the screen using a suction cup or a pry tool. Be cautious not to damage any other parts of the phone while doing this.

Attach the New Screen

Once the old screen is removed, clean the phone frame with a microfiber cloth. This will ensure proper adhesion of the new screen. Take the new phone screen and attach the touch digitizer to it. Use adhesive tape to secure the digitizer in place.

Test the Screen

Before fully reassembling the phone, it is essential to test the new screen. Connect the necessary cables and power on the device. Check if the touch response and display quality are working correctly. If there are any issues, double-check the connections and reassemble if necessary.

Reassemble the Phone

If everything is working as expected, carefully reassemble the phone by following the steps you took to disassemble it. Ensure all the components are in the correct positions and all the screws are tightened properly. Insert the battery and SIM card, then close the back cover.

Congratulations! You have successfully made a phone screen for your device. Enjoy using your newly replaced screen and take good care of it to prevent any future damage.

beeldscherm telefoon maken
How to Fix a Phone Screen

How to Fix a Phone Screen

Accidents happen, and one of the most common mishaps with a smartphone is a cracked or broken screen. Thankfully, fixing a phone screen is not as complicated as it might seem. In this article, we will guide you through the steps to fix a phone screen effectively.

1. Assess the Damage: Before proceeding with any repairs, carefully assess the extent of the damage to your phone screen. Is it just a minor crack or a completely shattered display? This will help you determine if it's a problem you can fix yourself or if you need professional assistance.

2. Gather the Necessary Tools: To fix a phone screen, you will need a few tools. These may include a replacement screen, adhesive, a screwdriver set, a prying tool, and a cleaning cloth. Ensure you have all the required tools before starting the repair process.

3. Follow an Online Tutorial: Look for online tutorials specific to your phone model that provide step-by-step instructions on how to replace the screen. These tutorials usually include detailed videos or written instructions along with images, making it easier to follow along.

4. Power Off the Phone: Before attempting any repairs, it is essential to power off your phone completely. This will help prevent any accidental damage and reduce the risk of electrostatic discharge that could harm the delicate internal components of your device.

5. Remove the Phone Cover: If your phone has a protective case or cover, remove it before proceeding. This will allow easier access to the screen and prevent any interference during the repair process.

6. Disassemble the Phone: Carefully remove the screws and other components that secure the phone's back panel. Use a prying tool to gently separate the back cover from the rest of the device. Take your time and be cautious not to damage any internal parts.

7. Replace the Screen: Once you have access to the phone's internals, locate the screen assembly and disconnect it from the motherboard. Carefully remove the broken screen and replace it with the new one. Be sure to connect all cables properly.

8. Reassemble the Phone: Now that the new screen is in place, reassemble the phone by securely attaching the back cover and tightening the screws. Make sure everything is aligned correctly before tightening the screws completely.

9. Test the Screen: Power on the phone and test the new screen. Check for any abnormalities, such as dead pixels or touch sensitivity issues. If everything looks and works fine, congratulations! You have successfully fixed your phone screen.

10. Seek Professional Help (if needed): If you are not confident in your ability to fix the screen on your own or encounter any difficulties during the repair process, it is best to seek professional help. Trying to force the repair could potentially worsen the damage or void your phone's warranty.

Remember, fixing a phone screen requires patience and precision. Take your time, follow the instructions carefully, and if you feel unsure at any point, it's better to seek professional assistance.

Screen Repair: Step-by-Step Guide for Phones

Accidents happen, and one of the most common mishaps is a cracked or shattered phone screen. Fortunately, you don't need to panic or rush to buy a new phone. With a little bit of patience and the right tools, you can repair your phone's screen by yourself.

Step 1: Assess the Damage

The first step is to closely examine the extent of the damage. Is it just a small crack or a complete shatter? This will determine the level of repair needed and the replacement parts required.

Step 2: Gather the Tools

Before you start the repair, make sure you have all the necessary tools. These may include a screwdriver set, a suction cup, a plastic opening tool, tweezers, and a replacement screen.

Step 3: Power Off the Phone

Before you begin any repairs, it's essential to turn off your phone and remove the battery if possible. This ensures your safety and prevents any accidental damage to the device.

Step 4: Remove the Broken Screen

Using the screwdriver set and the plastic opening tool, carefully remove the screws and pry open the phone's casing. Be gentle and cautious to avoid damaging any internal components. Once the casing is open, disconnect the cables that connect the screen to the mainboard.

Step 5: Install the New Screen

Take your replacement screen and carefully connect the cables to the mainboard. Once done, gently place the new screen into the casing and secure it with the screws. Double-check all the connections to ensure they are secure.

Step 6: Test and Reassemble

Before fully reassembling your phone, it's crucial to test the new screen. Connect the battery, power on the device, and check if the display is functioning properly. If everything looks good, reassemble the phone by putting back the casing and tightening the screws.

Step 7: Consider Professional Help

If you are not confident in your repair skills or if the damage is extensive, it's always a good idea to seek professional help. Consult a mobile phone repair service center or a technician who can handle the repair for you.


Repairing a cracked phone screen may seem daunting, but with the right tools, patience, and attention to detail, it's entirely possible to fix it on your own. However, it's essential to know your limitations and seek professional assistance when needed.

Remember, prevention is always better than cure, so investing in a screen protector and a sturdy phone case can help protect your phone from future accidents. Take care of your phone, and it will serve you well for a long time to come!

Screen Repair: Step-by-Step Guide for Phones

DIY: Replacing a Phone Screen Display

Undoubtedly, smartphones have become an integral part of our lives. They are our primary means of communication, entertainment, and accessing information. However, accidents do happen, and sometimes our beloved smartphones end up with a cracked or shattered screen display. While this might seem like a disaster, fear not! With a little bit of know-how and some careful steps, you can replace a phone screen display yourself. Before you begin: It's important to note that screen replacement should only be attempted if you are confident in your skills and have some technical knowledge. If you are unsure, it's always best to seek professional help to avoid causing further damage to your device. Step 1: Gather your tools: To successfully replace a phone screen display, you will need a few essential tools. These include a small screwdriver set, a suction cup, a plastic spudger, tweezers, and a replacement screen specific to your phone model. Make sure to purchase a high-quality replacement screen to ensure optimal performance. Step 2: Power off and remove the battery: Before starting the screen replacement process, power off your phone and remove the battery if possible. This will prevent any accidental damage or short-circuits. Step 3: Remove the old screen: Carefully use the small screwdriver to remove any screws securing the back cover. If there are no visible screws, gently slide the plastic spudger between the back cover and the main body of the phone to loosen it. Once the back cover is removed, you can proceed to locate and remove the screws holding the screen in place. Use the plastic spudger to carefully detach the screen from the phone frame. Step 4: Disconnect cables: Locate the cables that connect the screen to the phone's circuit board. These cables are usually thin and fragile. Gently disconnect them using the tweezers or your fingers. Take note of the specific order and position of the cables for easy reassembly. Step 5: Install the new screen: Take your replacement screen and carefully align it with the phone's frame. Make sure all the necessary cables are properly connected. Once aligned, gently press the screen into place. Step 6: Reassemble the phone: Secure the replacement screen by reattaching any screws that were previously removed. Snap the back cover back onto the phone and secure it with screws if applicable. Step 7: Test the new screen: Power on your phone and test the new screen to ensure it is functioning correctly. Check for any dead pixels, touch responsiveness, and color accuracy. If you encounter any issues, double-check the cable connections and repeat the installation process if necessary. Final thoughts: Replacing a phone screen display might seem like a daunting task, but with careful attention to detail and the right tools, it is possible to do it yourself. However, if you feel uncomfortable or unsure at any point, do not hesitate to consult a professional. Remember, take your time, follow the steps diligently, and soon enough, your phone will have a brand-new screen!
Image sources: -
Update cookies preferences